Complete Automatic Hot Liquid Fruit Juice Bottling Production Line
Brief introduction of the juice production line:
1.The machine is mainly used for bottling juice ,such as apple
juice ,mango juice,orange juice,and other fruit juice.It can also
be used for bottling water ,such as pure water and mineral water.
2.The full automatic fruit juice filling machine include washing
part ,filling part,and sealing part,all of the process is
3. It adopts hanging type conveying-bottle structure to make
changing bottle model more convenient, faster and more east.
4. The advanced OMRON programmed controller (PLC) is adopted to
control the machine to run automaticly,
5. Transducer is uesd in bottle entering chains to adjust speed to
make the operation of moving bottle steadily and reliably.
6. It is convenient to operate with higher auromation because
everypart of the machine is inspected to run with photo electicity.
7.The machine can be produced acoording to your requiements,because
we are professional beverage processing manufacture.
1. Rotative rinsing turret one treatment, fixed nozzles, with
2. The grippers take the bottles from the inlet starwheel while
they are still driven by the starwheel, thus guaranteeing a safe
3. After the gripping, the bottle is turned upside down and centred
above a spraying nozzle which directs a stream of rinse water into
the bottle. After the draining period the bottle is turned over to
an upright position again.
1.The starwheels drive the bottles always "by the neck" through the
rinsing, filling and capping steps. For the various types of
bottle, it is easy to adjust the structure for the operator by our
2.Product bowl is to reduce the loss of heat.
3.If the temperature is low than the setting value, the filling
valves will stop and return the last beverage in filling valve to
recycle tank and return to UHT again to sterilize with pump.
1.Rotative capping turrent, suitable to the application of screw
plastic caps on PET bottles
2.The fixed part consists of the cap hopper, the cap feeder with
relevant motor and the cam actuating the capping heads.
3.The heads are raised and lowered by the action of a follower that
is riding on a shaped cam.
Advantages of our production line:
All products adopt all-around computer aided design(CAD)
All auxiliary parts adopt international and domestic famous brand
Before delivery time, all complete sets will test run for 3days
continuously after quality inspection, they can be transferred to
|Production capacity( bph)||8000||18000|
|Number of filling head||18||30|
|Number of sealing head||4||6|
|Compressed air||Pressure: 0.3-0.6mpa|